How to disassemble the bearing properly

release time：2020/3/9 21:06:46

1.      

2. 1. Knocking method (add a spacer at the bottom of the bearing. Tap it with a hand hammer to remove it. Pay attention to the point)

3.      

4. 2. Pull-out method (using a special puller, slowly remove the handle and slowly pull the bearing out when disassembling)

5.      

6. 3. Push method (pressing the bearing with a press)

7.      

8. 4. Hot-breaking method ( the oil heated to 100 degrees bearing is cast on the bearing to be dismantled, and the bearing ring is pulled out after using the puller after the thermal expansion of the bearing ring)

Bearings are precision products, so we should be careful when disassembling to avoid scratching or damaging the bearings!